Laser seal machine
- Brand: ???
- Type: ???
The latest 2.0 cm high intensity focused lens, 12 mm lens, laser seals machine industry pioneer, more power, motherboards latest professional upgrade version, 6.0, industrial electronic components performance more stable.
The company with baidu, Google, netease, sohu, sina, alibaba, China machinery network large portal, such as long-term partners. Official website traffic has amounted to 15 million times, cumulative sales of more than millions, sales lead for 10 years in a row!
Official website: http://www.diaokejiqi.com
The national free consultation telephone: 400-708-2008
Believe brand power. Stone strength! By the good faith world, survival by the quality!
Our service and commitment! Stone product! It is fine!
Specialty of laser engraving machine
1: a wide range: co2 laser can be almost any non-metallic materials for carving cutting. And the price is low!
2: safe and reliable: the non-contact processing, the material will not cause mechanical extrusion or mechanical stress. There is no mark, does not damage the surface of the machined part; Will not make the material deformation.
3: precision: the machining precision can reach 0.015 mm.
4: save the environment: the beam spot diameter and small, generally less than 0.5 mm; Cutting processing and save material, safety and health.
5: results: guarantee the effect of the same batch.
6: high speed quick, can immediately according to the computer output pattern of high-speed engraving and cutting.
7: low cost, without being limited by the processing quantity, for small batch processing services, laser processing is more cheaper.
Product information:
Laser tube power: 40 watts (level 1 chengdu CO2 laser and can work continuously for 1440 hours)
Power supply voltage: AC220V enclosed ignition coil power supply
Carving board, stone board (motherboard market at present the most stable)
Plotter: wear-resisting, anti-corrosion design
The weight: 23 kg
Machine size: 80 cm X50 cm X23 cm
Largest carved picture: 250 x160
Largest mirror area: 197 * 75
Positioning accuracy: 0.005 mm
Carving precision: 0.15 mm
The machine power consumption: 200 watts
Smoke exhaust design: in the back of the wind
Using software: stone carving software
New jig: platform
Elegant appearance, precision mechanical assembly, speed and accuracy
Obstacles and solve the problem of other machine carved small difficult, precision is higher
And faster. Additional cutting, engraving pictures, photos, etc
Kinds of functions. Engraving speed is the original mirror
More than 2 times. Carefully designed laser engraving deeper, let you work
As a more simple and quick. Efficient typesetting software, including ethnic culture
Advanced functions such as word, imitation pseudo, follow design, more saving your row
Version of the time, improve work efficiency.
Fourth, machine configuration and new antiskid structure
The first chapter introduction to the engraving machine
Section 1 engraving machine structure and attachment
Laser seals machine main parts: mainly including carbon oxide laser, laser power supply, reflective, focus on the original, original operation panel, fixture, CNC system and exhaust, water cooling system, etc.
Working principle: laser seals machine is a kind of semi-automatic nc machine tools, is through the computer operating platform control a mechanical combination of tools. Laser illuminator is through the working principle of electric energy is converted into heat energy, the objects high temperature gasification formed chapter body shape.
Attachment list:
1, 2, seal a seal machines software is a set of 3 a, output cable
4, the power cord a 5, a 6, fan, a water pump, the air duct
Use the matters needing attention in the second quarter
This equipment is a high pressure, low pressure and micro electric and for your security, please strictly abide by the points for attention while using it.
A. Computer engraving machine and must be synthetic, easy observation and machine operation.
2. Placement equipment before use must have sufficient space, so that the discharge of waste gas and grounded.
3. When using the equipment staff it is strictly prohibited to leave work place, in order to avoid sudden hair conditions, leading to loss of expanding.
4. Pay attention to use voltage and interference around the presence of high voltage equipment use, voltage may not appear the phenomenon such as too high and too low, if you have this kind of phenomenon please reasonable handling or installation
Regulated power supply device.
Five, the cooling water used in the work must be kept pure (it is best to use clean water, reduced scale deposition, water temperature should not exceed 25 degrees Celsius) and pipe unimpeded.
Six, engraving machine work according to the different items to choose different methods of carving and sculpture current.
Seven, carving machine continuous work in 3 hours later, must stop half an hour before use.
The third section of the equipment grounding protection
Laser seals machine is integrated in high pressure and low pressure and micro electric, so the protection of the ground wire to the owner and the equipment and its importance. Ground wire and ground wire connect is unqualified is not allowed to boot using, the user in not according to the specifications of consequences, the company does not undertake any responsibility.
A. Ground wire and the ground shall be not less than two, ground wire with diameter 2 mm plastic multi-strand copper wire is advisable. Grounding requirement of galvanized round steel 20 mm in diameter or more than 45 mm x 45 mm galvanized Angle iron, depth of not less than two meters, grounding electrodes should be buried in damp soil.
2. Ground wire should be through galvanized screw fastening and the ends of the earth, the ground and fixed on the equipment ground column.
3. Should be grounded microcomputer is also fully at the same time, in order to prevent electrostatic interference laser equipment normal use.
Around four. Each wire filling salt content not less than 550 g of salt aqueous solution of two ground vertical distance not less than 2.5 m.
The second chapter installation and operating instructions
The first section is installed
A. The product work environment must be in a dry, dry environment, the body is placed in a stable work platform, may not be tilted, and microcomputer synthetic put, good earthed, handling not collision in the chassis, so as to avoid damage appearance or make light path deviation.
2. Electrical connections, this equipment use ac 220 v, 50 hz power supply, and confirm it
Risk silk bearing limit. This equipment is rated power = = 2 ma 60 w starting current, this equipment requires configuration corresponding voltage stabilizer.
3. Water cooling device, operation table placed behind water blood and filled with pure water, good connection pumps, pay attention to in and out of order. In the blood of the pumps are connected at one end, and end. Note the pipe don't distortion, keep clear of water (often observe the pump after use, in order to avoid equipment damage caused by the outside).
Four. The installation of the fan, the fan and duct connection good, ensure smooth exhaust gas discharge, and regularly clean the fan of the soot (usually by 2 months for a cycle).
The second section of the control panel is introduced
Control panel in sequence is current meter, measuring position, sculpture, coordinates to adjust current switch to adjust current, laser switch, a sculpture of switch and the cursor.
Ammeter: laser is indicated by the current index in the work. Current instructions generally oscillating between 0 ~ 30 ma, generally no more than 15 ma.
Location adjustment knobs: it's location in the state of the laser current intensity of the regulator.
Carving adjustment knobs: is the laser engraving in the state of the strength of the current regulator.
Coordinate switch: is the total power switch device, open the switch machinery branch back to the initial state, known as the "reset".
Laser switch: is to control the laser power supply switch, the switch must be opened in the work.
Location changing switch: carving is according to the need of laser intensity in a work conversion, play carved in processing items status which USES current carving. The switch is off, is a state close to carving.
The third section connection and debugging
The rear of the carving machine is power line and output line interface, connect well in turn. Good to connect the pump and fan, water pump connected to the laser tube proper circulation cooling water and suction fan is normal, can open the engraving machine total power switch.
Horizontal machine debugging
A, first adjust before starting the laser focus position, laser head from the table clamp position is 50 mm, upper and lower error is 2 millimeter, this position is the best carving.
Second, the first open a computer, the software installation parameters have been set, and then open the machine coordinate switch, indicator, car normal reset to initial state. Open the laser light is lit, and the other switch to a state.
Three, optical path adjustment, lie ma chine is made up of three mirrors and a lens laser transmission light path system. Note the laser is not visible, don't will hand in the debug, head leaned into the mirror light path
